Close X

FACTORY SALE

Some exclusions may apply. Subject to availability and retailer participation.
The Juliana Bicycles Joplin full suspension mountain bike mounted to a workstand in a garage

Setup Guide

So you’ve got yourself a shiny new Juliana, now it’s time to make it truly your own. From suspension setup to saddle height, this guide will show you the basics of bike setup — without any mansplaining.

The Juliana Bicycles Joplin full suspension mountain bike mounted to a workstand in a garage

Setup Guide

So you’ve got yourself a shiny new Juliana, now it’s time to make it truly your own. From suspension setup to saddle height, this guide will show you the basics of bike setup — without any mansplaining.

Juliana XC Pro Rider Evelyn Dong adjusting the height of a Rockshox Reverb on a Juliana Bicycles Roubion MX full suspension mountain bike
Juliana XC Pro Rider Evelyn Dong adjusting the height of a Rockshox Reverb on a Juliana Bicycles Roubion MX full suspension mountain bike

Saddle Height

The good news is there’s a simple way to get a good starting point for saddle position. Start by sitting on your bike with the dropper post fully extended and your riding shoes on. Place one of your heels on the pedal. Your leg should fully extend but shouldn’t require your hip to compensate to reach the pedal—if your hips rock, lower your saddle in one-centimeter increments until it stops. With this method, when you’re clipped in (or have your feet in the correct position on flats), your knee should still have a little bend at the bottom of the pedal stroke—putting you in an efficient, powerful position.

Looking to swap out your dropper post? Make sure it’s the right fit with our Dropper Post Compatibility tool!

Learn More

Juliana XC Pro Rider Evelyn Dong adjusting the saddle angle of a Juliana Bicycles saddle on a Juliana Bicycles Roubion MX full suspension mountain bike
Juliana XC Pro Rider Evelyn Dong adjusting the saddle angle of a Juliana Bicycles saddle on a Juliana Bicycles Roubion MX full suspension mountain bike

Saddle Setback

Saddle setback and saddle tilt don’t have a rule of thumb that’s as simple as saddle height, but a good starting point is to put your saddle perfectly level, in the middle of its rails, and adjust from there. If you tend to ride very steep trails over more flat ones, you might want to try a more forward and/or more nose-down saddle position. Conversely, you might consider moving your saddle back and/or keeping your saddle level if you ride mostly flat trails. Remember, little adjustments make significant changes, so never adjust more than one centimeter at a time.

A female mountain biker standing with her Juliana Bicycles Roubion MX full suspension mountain bike
A female mountain biker standing with her Juliana Bicycles Roubion MX full suspension mountain bike

Sweet Spot

After you’ve got your starting position, it’s time to take your bike for a spin and start tinkering. For height, it’s always better to go slightly too low than too high—so focus on making sure your knee has a bend at full extension–it’s sometimes difficult to tell, but your knee should bend to about a 140-145-degree angle. If your saddle is too high, you'll likely feel pain in the back of your knees, lower back, or hamstrings. If your saddle is too low, you’ll probably get pain in the front of both knees.

Juliana XC Riders Rose Grant and Evelyn Dong riding their Juliana Wilder XC full suspension mountain bikes

CAVEATS

Keep tinkering as you settle into your new bike over the first few weeks, but don’t go too crazy. If your knee has a little twinge on a ride after ten pain-free rides, go for another ride to see if the pain persists—there are many factors at play for minor aches and pains other than saddle position. If you've had knee injuries and/or just can't get comfortable, see if your bike shop can point you towards a qualified bike fitter for help.

Juliana XC Riders Rose Grant and Evelyn Dong riding their Juliana Wilder XC full suspension mountain bikes

CAVEATS

Keep tinkering as you settle into your new bike over the first few weeks, but don’t go too crazy. If your knee has a little twinge on a ride after ten pain-free rides, go for another ride to see if the pain persists—there are many factors at play for minor aches and pains other than saddle position. If you've had knee injuries and/or just can't get comfortable, see if your bike shop can point you towards a qualified bike fitter for help.